Wherever cotton is spun, we are close by.
From the Ludhiana belt in the north, through the Vidarbha and Gujarat mills of the west, down to the Coimbatore belt in the south. There is usually an Innospin system running within reach of your mill.
Installations grouped by India's main spinning belts. Figures are drawn from our consolidated installation record and carry no customer details.
The mills that come back.
Installation after installation.
A large share of our installations are repeat orders: the same spinning group coming back for the next unit, the next expansion, or a conversion of an older system. Several groups are running six or more Innospin systems across their units.
That is the measure of installation quality we trust most, because nobody orders a second transport system from a supplier who caused them trouble on the first.
With more than 110 installations around the country, there is usually one within reach of wherever you are. Tell us your location and we will arrange a mill visit. Set up a visit →
Fixed-flow. Flexi-flow. Batch-flow.
One right answer for every mill.
Three RTS architectures spanning every level of mill automation, from economical fixed routing to fully hands free batch creeling. Our configuration portal tells you precisely which one your production requires.
Installed systems, on working floors.
Every clip and photograph below is from a mill running an Innospin system in production.
Full bobbins swapped for empties at the speed frame, hands-free, with the stripper cleaning empties before they return.
A bobbin train called out of the dynamic parking bay, routing itself to the frame that needs it.
The moving rail segment is driven positively to position by an electric actuator, not pushed by air. Fewer jams, no leak hunting.
What an Innospin installation looks like.
Automation across your entire mill floor.
We are extending our automation capability into every major material-handling workflow in a spinning mill. Speak to our team about your requirements.
See full portfolio →Find out exactly which RTS your mill needs.
Enter your Speed Frame data, spindle counts, and doffing cycle. Get a Fixed-flow or Flexi-flow recommendation backed by real production mathematics, in about four minutes.
Open the RTS Configuration Portal →Takes about four minutes. Our engineering team follows up within five business days.